Polystyrene Recycling Compactor
Polystyrene (EPS) fills skips fast because it’s mostly air. Mil-tek polystyrene compactors reduce EPS volume up to 40:1, turning bulky foam into dense, stackable blocks that are easier to store, transport, and recycle.
Get advice on the right compactor or request a quote
Which polystyrene compactor fits your site?
Use your EPS volume and output needs to choose the right model:
EPS1000
- Compaction ratio: 40:1
- Throughput: up to 15 kg/hr
- For small to moderate EPS volumes
Benefits of polystyrene compactors
Free up valuable space with a compaction ratio of 40:1
Reduce costs related to disposal and handling expences
Improve workplace safety by reducing loose EPS build-up
Turn waste into a potential revenue by selling dense compacted blocks
Reduce environmental impact by making polystyrene recycling ready
EPS recycling made practical
Expanded polystyrene (EPS) is often thought of as “non-recyclable” because it’s bulky,
lightweight, and costly to store and transport. In reality, the challenge is logistics -
not the material itself. A Mil-tek recycling compactor solves that problem by turning
loose EPS into a dense, manageable output stream.
Polystyrene recycling or EPS recycling helps reduce pollution impact by diverting waste away from landfill and transforming it into a reusable raw material with commercial value. In fact, polystyrene is fully recyclable when processed correctly.
Reduce environmental impact with Mil-tek EPS equipment for small or large EPS volumes.
Before → After
Before: Loose EPS/foam fills skips quickly, takes up valuable space, and is expensive to move because you’re mostly transporting air.
After: An EPS recycling machine compacts the foam into dense blocks that are easier to store, stack, and palletise - making collection and recycling far more practical.
What happens after compaction?
- Dense blocks are staged for pickup or consolidated for backhaul/transport
- Recycling is simplified because the material is uniform and easier to handle
- often, compacted EPS is accepted by recycling partners and may be sold depending on your local recycling market and contamination level
Why it matters
By improving storage efficiency and reducing transport volume, an EPS compactor helps:
- Reduce landfill disposal pressure
- Improve site organisation and safety
- Support sustainability goals by increasing recycling viability and reducing transport-related emissions
How a polystyrene compactor works
- Load polystyrene into the hopper
- The machine removes trapped air and processes the foam
- EPS is densified into stackable blocks
- Blocks can be stored and palletised for transport or recycling
Mil-tek polystyrene compactors are suitable for any kind of Polystyrene material whether you call it expanded polystyrene (EPS), airpop etc.
An EPS compactor is designed to automate this process. It breaks down the material and uses heat and pressure to transform it into dense blocks or briquettes. These compacted units are far easier to store and transport, and they can be sold for recycling into new plastic products.
Installation & support
Getting the most from a polystyrene compactor depends on correct placement and setup. Mil-tek technicians install the unit on-site and help position it where it supports an efficient workflow – so EPS can be processed consistently without clutter or bottlenecks. This helps keep your foam stream contained and makes it easier to collect and palletise dense blocks for transport, recycling, or further processing.
Mil-tek provides practical support to help your equipment perform safely and reliably over time, including installation guidance and ongoing assistance when required.
Reduce Capital Cost with the EPA NSW Bin Trim Program
The NSW EPA Bin Trim Equipment Rebates Program supports businesses to reduce waste and increase recycling by offering rebates of up to $50,000 (covering up to 50% of eligible equipment costs) for approved on-site recycling equipment.
Mil-tek can assist with the process—from equipment selection and quoting to helping you prepare the steps required for application.
Flexible payment
Hire a Polystyrene compactor
A solution with great flexibility and service agreement included.
Purchase a polystyrene compactor
A solution with full ownership and maximum ROI over time.
Frequently Asked Questions
-
An EPS polystyrene compactor is a machine that turns eps and polystyrene waste materials into dense recyclable block, by removing trapped air. With a volume reduction by up to 40:1 it can save you a lot of space for storage and reduce pick-ups.
-
Polystyrene is known by several different names, including Expanded Polystyrene (EPS) and Airpop. While the terms vary, they all refer to the same lightweight plastic material, most commonly recognised as EPS6. This type of packaging is widely used to protect products such as food, seafood, electronics, appliances, and furniture during storage and transport.
-
40:1 – Often it’s possible to achieve a compaction ratio at 40:1 with a polystyrene recycling machine.
-
The polystyrene compactor that fits you depends on how muck EPS polystyrene waste you handle. The only difference between the two EPS recycling machines is the volume they are designed to handle.
-
Yes! – There are different EPS recycling companies across Australia that takes care of compacted EPS / polystyrene and makes sure it’s recycled. Some might even pay you when delivering compacted blocks depending on how clean it is.
-
When buying or renting polystyrene compactors from Mil-tek installation installation is fully covered. This means that one of our technicians will visit your siteto install the machine making sure it runs smoothly and is completely ready to use. Furthermore, he’ll learn your staff how to use the machine through a thorough training session.
Got a question?
Reach out today to discover how Mil-tek can support your business in improving waste handling while saving time, space, and costs.