60 tons of pressing force
Improved internal logistics
Large-scale recycling solution
Revenue generation from baled material
One machine to compact cardboard and plastic
The Mil-tek HZT600 Horizontal Waste Press is a hydraulic baler with upwards of 60 tons of pressing force. It is designed for heavy and continuous use in locations that produce large amounts of cardboard, plastic and packaging waste. A HZT600 horizontal waste press operating at full capacity can create two mill size bales of cardboard or plastic in less than an hour. Bales from a HZT600 baler can be sent directly to recycling mills for processing and recycling.
A large opening allows for waste to be continuously and safely loaded into an area of one cubic metre, where it will continuously be pressed. A pressing cycle of just 28 seconds ensures waste can continuously be loaded into the machine.
The machine sensors can detect if waste is being loaded, and will automatically continue the pressing cycle. The sensors will also stop automatically once all the waste has been pressed.
The high pressing force and speed of horizontal waste presses makes them ideal for businesses that handle large volumes of waste cardboard, waste plastic, and waste packaging. Logistics and distribution centres, packaging warehouses, recyclers and printing companies typically handle large volumes of bulky waste material, and horizontal waste baling machines allow them to do this efficiently.
Bales from a horizontal waste press are tied manually using Easy Loop steel wire ties, followed by an automated bale-ejection process. Bales produced can be upwards of 450kg in weight depending on the material used, and can be easily stacked and stored on standard European pallets.
The floorspace of the HZT600 covers 7.5 metres and requires a 3-phase connection. A Mil-tek technician will guide the installation process.
The open top allows for continuous loading of waste material. If the machine sensor detects that waste is still be loaded, it will continue to cycle.
The machine has an indicator to determine when to bale out. EasyLoop Steel wires are fed through channels around the bale, and the machine has an automated bale ejection mechanism.
Literally.. tons! The open top allows continuous feeding of waste cardboard or plastic packaging. If continuously loaded and operating optimally, the HZT600 waste press can make up to 2 450kg bales per hour. Working optimally, that means 16 bales per working day, 80 bales per week, or around 36 tons of waste.
You could, but we do not recommend it. In order to maximise the quality of the baled material, and maximise the cost you can sell it to recyclers for, Mil-tek recommends that you bale cardboard and plastic seperately.
If you handle mixed quantities of each material, one of experts can advise you on a suitably smaller machine to bale the other material.
The HZT600 is power by 3 phase, 32A. It has a noise level of 75 db(A). For more information about the technical specifications of the machines, please see below, or consult your machine's serial plate.
Mil-tek uses EasyLoop™ Wire Ties to tie bales from a horizontal baler. The HZT600 baling machine features easy-to-use channels that allow you to feed the wire ties around the bale.
For more information on how these work, see the 'Product in Use' section below.
Demonstration of the HZT600 in action, here seen compacting cardboard
Fonterra is a leading consumer brands, and food service and dairy business in New Zealand
A HZT600 strategically installed in a recycling facility becomes an integral part of the working process. The fast cycle and continuous loading allow for rapid compacting and up to two recycle-ready bales per hour.
The open top can be adapted to automate a continuous flow of waste cardboard, maximizing the speed and efficiency of the operation.
Logistics and distribution centres process huge amounts of plastic and cardboard packaging as good as received and distributed. Many goods go through multiple layers of packaging that changes and is repackaged through the process.
A HZT600 paired with another large scale baler ensures that this packaging material has minimal interference with the working environment.
Large supermarkets handle a huge volume of packaging waste from consumer goods, food and other perishable items. A HZT600 is the ideal baler to appropriately handle large volumes of mixed recyclable waste.
Easi Loop steel wires and an automated piston ensure the bale.out process can easily be managed by regular staff.
|Bale weight||<450 kg|
|Noise level||70 dB (A)|